- Savings
Supplied as a high solids powder without a premium price. - Safe
Environmentally safe product that's free of zinc, glycol ethers and other toxic chemicals. Within OSHA's acceptable alpha quartz guidelines. - Mixing
Readily mixes with cold water. - Low Solids
Effective at low solids concentrations. - Foam Control
Contains a defoamer designed for the product's surfactant system. - Fast Drying
Dries faster than conventional anti-tacks. - Clean Equipment
Reduces the amount of build-up found on equipment chains, belts, and festoon bars. - Clean Molds & Parts
Product will not carbonize in molds or discolor molded parts. - Controls Sludge
Flock-like sediment that may form is easily dispersed with minimal agitation.
DRY-DIP KSF
Powdered Rubber Anti-Tack Compound
DESCRIPTION
DRY-DIP KSF is a mixture of organically modified wetting agents and silicates. The product is supplied as a free-flowing powder that is formulated to evenly coat low durometer and highly plasticized rubber compounds.
Dispersible in cold water, the product’s unique wetting, non-settling, and non-foaming properties are stable after an initial mixing time of less than thirty minutes. Once properly dispersed, the product yields a clear, fast drying, non-dusting anti-tack coating that is essentially free of any crystalline residue.
DRY-DIP KSF is biologically stable and will significantly reduce the amount of build-up found on process equipment chains, belts, and festoon bars.
The product is zinc-free and contains less than 0.05 percent alpha quartz, well under the Occupational Safety and Health Administration’s (OSHA) permissible level.
DRY-DIP KSF is designed to impart a uniform, non-greasy anti-tack coating on a wide variety of stocks including cold flowing soft natural rubber and butyl compounds.
DRY-DIP®KSF will help insure consistent feed of coated compound into cold feed extruders.
DRY-DIP KSF is designed for compounders who air-cool their stock after the dip has been applied.
DILUTION
The proper dilution and mixing of an anti-tack has a direct impact on the product's performance. RubiChem offers an automatic dilution system that monitors and maintains the process tank’s active solids level. Contact RubiChem or your Sales Representative for additional information.
PACKAGING
DRY-DIP KSF is packaged in 50 pound (22.68 kg) polyethylene bags, unitized and stretch-wrapped 40 bags per skid.
STORAGE
RubiChem recommends using the product within one year of purchase. Store in a cool dry area. As with all powders, the product should be kept dry.
Refer to the DRY-DIP KSF Material Safety Data Sheet and Application Data Sheet before handling or using the product.
Contact RubiChem or your Sales Rep for a confidential consultation on your company's current rubber processing methods, additional product information or to obtain a product sample.
DRY-DIP is a registered trademark of RubiChem Inc.
The information set forth is furnished free of charge and is based on technical data that RubiChem believes to be reliable. This information is intended for use by persons having technical skill and is to be used at their own discretion and risk. Since conditions of use are outside our control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate under or a recommendation to infringe upon any patents.